Projects
Engineering ZLD from Barcelona.
We serve Southern Europe and North Africa, with systems in operation or being deployed in Spain, the UK, the USA, Morocco, India and Chile.
Reference projects
In continuous operation, for reference clients.
Municipal reuse, process water and industrial zero liquid discharge.
| Client | Application | Technology | Result | In operation |
|---|---|---|---|---|
| Bosch | Industrial effluent, India | ZLD: HyBatch + CEE | Zero liquid discharge | 12 months |
| Honda | Motorcycle & Scooter India | ZLD: HyBatch + CEE | Zero liquid discharge | 8 months |
| SUEZ | Municipal water reuse | HyBatch | 20% less energy, fewer reagents | 15 months |
| Topdental | Process water, Yorkshire, UK | HyBatch | 35% lower cost, no softeners | 17 months |




Featured project
Spain pilot: landfill leachate
Our first CEE pilot in Spain treats landfill leachate on electricity alone, with no waste heat. It was built to test both open loop and closed loop configurations at the same site.
- Recovered water TDS<50 mg/L
- Conductivity<100 µS/cm
- pHneutral
- Energy sourceelectric only
Water quality results come from analysis by an accredited laboratory.

Sectors and applications
Where we change the economics of water.
From 25 to 1,000 m³/day per installation.
Landfill leachate
High organic and saline load.
Digestate
Concentration and water recovery.
Industry and mining
Metallurgy, galvanic, textile and chemical.
Brines and RO reject
Concentration of brines and RO reject, including lithium enrichment.
Ultrapure water
From well or mains supply.
Pharmaceutical
Process water without a softener.
Municipal reuse
Direct and indirect reuse.
Food and beverage
Closed process circuits.
Presence and deployment
More than 25 units installed.
Systems in operation and deployments under way in six countries. In Spain and Morocco we deploy together with our strategic partner Seinec.
About us
Proven technology, delivered as a complete service.
Wise Water Solutions S.L. delivers Zero Liquid Discharge for industrial wastewater. We combine partner technology with engineering, operation and maintenance, from the planning stage to post-construction facility management.
Project design
We analyse your site, energy availability and effluent chemistry, then design a system that fits your process, retrofit or greenfield.
Sizing and validation
We split the treatment between stages and test with your real water, so the performance is proven before you commit.
Operation and maintenance
We supply, install, operate and maintain the system. You pay per m³ treated, with performance committed by contract.



Next step
Send us your effluent analysis.
An engineer will tell you whether ZLD fits, how the treatment splits between stages, and whether buying or paying per m³ suits you better.